+91 9974186546

Vadodara, Gujarat (India)

Inline Silencers and Reactive Silencers

During free venting or expansion of pressurised steam or gas, kinetic energy in terms of waves with high pressure amplitudes is released which leads to loud noise.

Inline Silencers (Pressure Silencers) :

This silencer works accordingto the splitter silencer system. It can be used inside pressure piping systems to reduce the noise from valves, compressors, pumps, etc. The absorbers are designed on the basis of media (pressure, sort of media, temperature, and density).

The internal splitters are designed for higher streaming forces and this is the reason why we use the following set up:

  • concentrically arranged splitter rings
  • frames out of 2,0mm sheet metal galvanised or stainless steel
  • Absorbing material out of mineral fibre (not flammable acc. DIN 4102 Kl. A) with sufficient density
  • Abrasive protection with 1 layer glass-silk and 1 layer SS narrow wire mesh
  • cover with perforated sheet metal 2,0 mm galvanized or SS

The vessels of the pressure silencers are in most cases subject to a pressure equipment directive:

  • According to ASME and EN code
  • Classification of vessel acc. to conformity diagrams (PED 97/23/EG)
  • Indian Boiler Regulations (IBR)
  • Calculation acc. to AD 2000
  • If applicable pre – approval of drawings through notified bodies
  • Client standards

    Reactive Silencers (Resonator) :

    The reactive silencer type is used, where noise at low frequencies (with high energy) or noise with tonal components must be reduced. It can be used inside pressure piping or exhaust system connected with the environment. Reactive silencers can be designed only for reducing the noise of specific frequency band, e.g. number of fans x rotation. To reduce, additionally, higher or other frequency noise an absorption part becomes necessary which leads to a combined reactive – absorption silencer.

    Your RFQ:

    • Type of machine and power
    • Totations per minute
    • Number of fans, impellers, teeth of gear-wheel
    • Temperature
    • Kind of medium
    • Pressure
    • Pipe connection

    The advantages are:

    • Main frequency band noise will be reduced effectively
    • Additionally other frequency noise will also be reduced (broad band)

    Main applications:

    • Roots compressors
    • Heating exhaust duct
    • Piston or screw type compressors

      About Company

      We constantly strive for new innovations and sustainable improvements in our area of expertise – to benefit you, our customer!!.

      Company Address

      B-301, Aries Pride, Saraswati Society, Vasna Road, Vadodara – 390015 Website: www.noiseprotection.in

      Contact Info

      +91 99741 86546
      +91 99133 48770

      Workshop 1

      G.I.D.C. Manjusar, Savli, Vadodara – 391775

      Workshop 2

      G.I.D.C Makarpura, Makarpura, Vadodara – 390014